CNC Spring Steel Tube Peeling Machine

Chat Now

Product Details

CNC spring steel tube peeling machine

1.General Description:

Yantai Haige Machine Tools Co.,Ltd. was built in 1999,which specializes in producing steel finishing equipment,such as spring steel tube peeling machine,Series JY Bar Straightening Machine,Abrasive Belt Ginder,Drawing Machine,Shot Blasting Machine,Centerless Grinding Machine,CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc.We also engage in continuous hard chrome plating equipment and heat treatment equipment.

Based on 15 years manufacture and design experience,our machines have been exported to Russia Vietnam,India, Pakistan,Iran,South Korea,North Korea,Taiwan and other countries and regions.

2.Specific Description:

CNC spring steel tube peeling machine is one of our main products,this kind of machine is strictly manufactured by our company,we always regard the machine’s quality as our life which could produce the perfect surface of the tubes.With 100% power start performance to guarantee the completely rule out the problem of failure start.This kind of CNC spring steel tube peeling machine just adopts the full-automatic advanced technology.

6-产品描述图.jpg 7-产品描述图.jpg

Main Technical Parameters:

model		WXC80S
material requirement	diameter range (mm)	21＜dia＜83
	material length (mm)	≥2200
	yield strength(Mpa)	≤1100
	surface hardness	≤HB320
	straightness (mm/m)	≤1.5
	diameter tolerance	according to GB 702-2004 second group
	roundness(mm)	≤50% of diameter tolerance
	surface roughness(Ra)	≤25～50μm
finished product	diameter range(mm)	20≤dia≤80
	diameter cutting depth(mm)	0.5~3
	diameter tolerance	≤h9
	surface roughness (Ra)	≤3.2μm
feeding speed (m/min)		1~12
cutting head rotation rate per minute(rpm)		430~1500
main motor(kw）		75/90
total capacity（kw）		95/110
compressed air (prepared by user)		0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine