Semi Automatic Brass Wire Peeler
brass wire peeler is one of our main products, The loading rack is rectangle shaped split structure, with part of flat surface and part of slope surface. There is pneumatic kicking arm installed on. Manual loading and arranged the bars neatly in order along the slope one by one next to the front block.
semi automatic brass wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as brass wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
brass wire peeler is one of our main products, The loading rack is rectangle shaped split structure, with part of flat surface and part of slope surface. There is pneumatic kicking arm installed on. Manual loading and arranged the bars neatly in order along the slope one by one next to the front block. The position of block is manually adjustable depending on the diameter size of bar for the convenience of pneumatic kicking arm.
|material requirement||diameter range (mm)||320＜dia＜510|
|material length (mm)||≥4500|
|diameter tolerance||according to GB 702-2004 second group|
|roundness(mm)||≤50% of diameter tolerance|
|finished product||diameter range(mm)||315≤dia≤500|
|diameter cutting depth(mm)||1.0~10.0|
|surface roughness (Ra)||≤6.3μm|
|feeding speed (m/min)||0.05~1.0|
|cutting head rotation rate per minute(rpm)||20~160|
|compressed air (prepared by user)||0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine|