Product descripation:
The coil to coil production line is to remove the surface decarburization layer,crack and other defects through the uncoiler/(pay off), straightener, peeling machine and polishing machine, make the surface from black wire to bright wire.
Main Parameters:
| diameter of raw material | 10.5-20mm |
| external diameter of coil | 1500-1600mm |
| internal diameter of coil | 900-1100mm |
| height of coil | 1500mm |
| weight of coil | ≤2.0mt |
| hardness of raw material | HB340 or 38±2HRC |
| tensile strength of raw material | ≤900Mpa |
| raw material | titanium and titanium alloy |
| environmental temperature | 8-50℃ |
| humidity | 20-92 % |
| altitude | ＜1000m |
| voltage | 380V, 3-phase landing |
| frequency | 50 Hz |
| atmosphere pressure | 5bar=0.5MPa |
| water pressure | 3-4 bar = 0.3~0.4MPa |
| highest water temperature | 35℃ |
Brief introduction of production line
The coil-to-bar production line removes the surface decarburized layer and crack and other defects etc. from the coil through centerless lathe (peeling machine) to achieve the transformation from black coil to bright coil.
Process flow drawing and layout drawing of production line
20coil opener→20horizontal and vertical straightening machine→ WXC30SCNC peeling machine →PM20 abrasive sand belt polishing machine→pre-bending device→coil collective disk
Hot Tags: high speed cnc coil to coil peeling and polishing line model:kp25(10-20mm), China high speed cnc coil to coil peeling and polishing line model:kp25(10-20mm) manufacturers, Auto Parts Peeler, Bearing Steel Bar Peeling Machine, Metal Bar Peeler, Copper Bar Peeling, Bright Bar Peeler, Carbon Steel Bar Peeling Machine
