The WXC series of center-less lathe and JY series of straightening machines are high -level new equipment with independent intellectual property rights on the basis of absorbing and digesting foreign advanced technology, making adventurous innovation, and research&development take into consideration of actual situation of domestic companies. Our technology reaches the domestic advanced level in reliability and quality while keeps a relatively lower price, with its efficiency more several times than the conventional process.
Our products are suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of centerless lathe is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
|
Model |
WXC100D |
|
|
Raw Material |
Processing Range(mm)(mm) |
Φ31~Φ100 X3500~12000 |
|
Tensil Strength σb(Mpa) |
≤1100 |
|
|
Surface Hardness |
≤HB320 |
|
|
Straightness(mm/m) |
≤1.50 ① |
|
|
Diameter Tolerance |
According to GB 702-88 second group |
|
|
Roundness |
≤50% of the diameter Tolerance |
|
|
Surface Roughness(Ra) |
≤25～50mm |
|
|
Finished Product |
Diameter Range(mm) |
Φ30~Φ98 |
|
Unilateral Cutting Depth(mm) |
0.35~1.5 |
|
|
Diameter Tolerance |
≤h10 |
|
|
Surface Roughness(Ra) |
≤3.2-6.3μm |
|
|
Roundness(mm) |
≤0.04 |
|
|
Processing Speed(Continuously variable transmission(CVT) m/min) |
1~8((for continuous chip, deep cutting or high strength, high hardness, much bigger or smaller bars, the feeding speed must be reduced to suitably lower.) |
|
|
Main Motor Power(kW) |
75/90(Optional) |
|
|
Feeding Motor Power(kW) |
7.5(Feeding) +11(Extracting) |
|
|
Weight(t)(for referrence) |
Main Machine 15 |
|
|
Total Capacity Approximate(KW) |
100/115(optional) |
|
|
Compressed air source (provided by the user) |
0.5~0.8MPa,1.8m3/min,0.8 m3 gas storage tank, with two-stage oil-water separator and compressed air refrigeration dryer |
|
Hot Tags: wxc100d semi-auto centerless lathe, China wxc100d semi-auto centerless lathe manufacturers, Bearing Steel Bar Peeling Machine, , Carbon Steel Bar Peeling Machine, Copper Bar Peeling, Auto Parts Peeler, Metal Bar Peeler
