WXC40Y SEMIAUTOMATIC TYPE Centerless Lathe best

WXC40Y SEMIAUTOMATIC TYPE Centerless Lathe suppliers

WXC40Y SEMIAUTOMATIC TYPE Centerless Lathe factory

WXC40Y SEMIAUTOMATIC TYPE Centerless Lathe high quality

WXC40Y SEMIAUTOMATIC TYPE Centerless Lathe price

WXC40Y SEMIAUTOMATIC TYPE Centerless Lathe

The WXC series of center-less lathe and JY series of straightening machines are high -level new equipment with independent intellectual property rights on the basis of absorbing and digesting foreign advanced technology, making adventurous innovation, and research&development take into consideration of actual situation of domestic companies. Our technology reaches the domestic advanced level in reliability and quality while keeps a relatively lower price, with its efficiency more several times than the conventional process. Our products are suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials. WXC series of centerless lathe is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.

Send Inquiry

product-974-382

Model		WXC40Y
Material	Diameter Range(mm)	Φ15~Φ43X2200~6000
	Yield Strength σ_b(Mpa)	≤1100
	Surface Hardness	≤HB320
	Original Curvature Curvature(mm/m)	≤1.5^①
	Diameter Tolerance	According to GB 702-88, 2 group
	Roundness	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25～50mm
After Peeling	Diameter Range(mm)	Φ14~Φ41
	Diameter Cutting Depth(mm)	0.20~1.50(the smaller the diameter,the smaller the cutting depth.)
	Diameter Tolerance	≤h10
	Surface Roughness(Ra)	≤6.3μm
	Curvature(mm/m)	The same as material
	Roundness	≤0.03
Feeding Speed(Stepless speed regulation m/min)		1.0~8.0(for continuous chip, material with deep cutting or high strength, high hardness, much bigger or smaller bars, the feeding speed must be reduced)
Cutting Head Rotational Speed(rpm)(r/min)		400~1200
Main Motor Power(kW)		30/45
Feeding Motor Power(kW)		4(feeding in)+0.55(extracting)
Size(m)(for Reference)		Main Machine 2.5X2.2X1.5 , whole machine (with racks ):12.5X2.2X1.5
Weight(t)(with racks for Reference)		7.0
Total Capacity(kW)		45/60
Compressed Air Source(Self-prepared)		0.5~0.8MPa,1.8m3/min,0.8 m3 and above air tank, 2 grade oil&water separatorand Compressed-air refrigerated dryer)