8618663896299
haigecn@haigechina.com
enLanguage
Advanced Search
QSMI-II Shot Blasting Machine For Wire 4-38mm
QSMI-II Shot Blasting Machine For Wire 4-38mm

QSMI-II Shot Blasting Machine For Wire 4-38mm

The equipment uses external power to pull and convey the wire to make the wire pass through the cleaning room. It uses an advanced high-efficiency and energy-saving shot blaster to project high-speed and dense projectiles to hit the surface of the wire to make the rust layer and oxide scale on the surface of the wire. The dirt quickly falls off, exposing defects on the surface of the wire, and obtaining a clean surface with a certain roughness, which meets the requirements of the combined drawing unit for the surface of the wire.
Send Inquiry

Product descripation: 

  1.  

1. Machine Introduction

 

Basic process conditions
① Raw material specification: Φ5 －Φ38mm Φ5 －Φ12mm Φ12 －Φ24mm Φ20 －Φ38mm
② Products specification: Φ4 －Φ38mm
③ Maximum working speed: 0-60m/min
 
2.Types of product:
Stainless steel, low carbon steel, medium and high carbon steel, alloy steel, martensitic valve steel, etc.
 
3.After cleaning, the surface cleanliness of the material:
Asa≥2.5; surface roughness: Ra≤12.5;
subject to GB6060.5-88 "Shot blasting, sandblasting, surface roughness comparison sample block".
No new injuries are allowed on the surface of the material after shot blasting.
 
4.Noise:
≤80dB (based on 1m away from the equipment), the noise should comply with the "Industrial Enterprise Noise Control Design Code" GBJ8F-85.
5.Indoor dust emission: ≤5mg/m3.
Dust and noise must meet environmental protection standards.

 

2. Main Parameters:

No.

Specification

Indicator

1

Wire rod specification

Diameter：Ф5～Ф12mm HGQSMI- I-22ZL
Ф12～Ф24mm HGQSMI- II-22ZL
Ф20～Ф38mm HGQSMI- III-22ZL

2

Working speed

Wire processing speed：
HGQSMI- I-22ZL: 5-60m/min
HGQSMI- II-22ZL: 5- 45m/min
HGQSMI- III-22ZL: 5-35m/min

3

Shot blasting quality level

GB8923-88 A-B Sa2.5-3.0

4

Used abrasive(Cast steel shot)

φ0.3mm,Hardness HRC45～50

5

Surface roughness of wire after cleaning

Ra12.5μm

6

Projectile surface coverage

100%

7

Noise level

1 meter away from the main machine ≤80dB(A)

8

Post dust

≤10mg/m3

9

Dust removal efficiency

99.9%

10

Hazardous substance content in workshop work area

Meet the latest national standards

11

Total air volume

100m3/min,Static pressure 300mmH2O

12

Power consumption

Total power

Around 101KW

Total air consumption

0.5 m3/min,0.45～0.6MPa

13

Overall dimensions of the main machine (excluding dust removal, only for reference)

 Length：～3440mm

Width：1580mm

Height：3690mm

 

3. Product dispaly:

product-1-1

 

4.Packing and delivery:

QQ20210713130924

QQ20210713130934

 

QQ20210713130942

we have much experience in exporting transportation packaging. Taking multi protection measures:

The first layer wrapping with foam film and stretch film for the special components, in order to avoid moisture.
Second layer inside of plywood box, adopting small square plywood block and strapping belt to fix.
Third layer the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
Fourth layer in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.

 

5. company profile:

H30a2bcb9bbec496ab9be85c15a3b741fE

Hffdc8f56f7104ca188b1154e3ff1b570S

 

Yantai Haige International Trading Co.,Ltd.,is a joint-stock enterprise engaged in exporting products such as machines,pumps and parts etc. produced in China to the markets abroad,which is located in Laishan district,Yantai City,Shandong Province,China.    Our company is based on the manufacturing plant-Yantai Haige machine tools Co.,Ltd and Yantai Hangjian Refined Special Steel Equipment Co.,Ltd. which focus on manufacturing many kinds of metal finishing equipment. Area of the factory is about 10000 square meter. There are one hundred and sixty staffs working in the factory,includes 14 staffs focusing on R&D.

 

QQ20210713132340

QQ20210713132349

We have exported various products which mostly are machines and machine parts to many countries.We can provide timely oversea service.    We are the exclusive agent of Yantai Volm Vacuum Technology Co.,Ltd.,which  focus on manufacturing various of vacuum pumps,we represent their business in international markets.Also we are appointed to be the sole sales agent of Shandong Gexin machinery manufacturing Co.,Ltd. for their Rotational Moulding products and machine.    We focus on the the quality of the products we sell,We welcome you to our plant and hope to have the pleasure of providing you the perfect products and best services.

 

6. Customer visit:

QQ20210713132550

 

7. Exhibition:

QQ20210713132605

 

8. Certificate:

QQ20210713132821

 

9. customer service:

1 Free quality guarantee period for 12 months, except for wearing parts.

2. Free provide long-term technical support
3. Free train buyer's operator in seller's factory
4. Fast response service within 24 hours

5.Our engineers can offer overseas service, including guiding installation, commissioning, training, etc, if our customer needs.

 

10. FAQ:

1. When is the delivery time?    

Delivery will occur between 15 and 20 days from order date. Faster delivery time can be arranged if needed.

2. Do you have any MOQ limit?    

Yes it depends on the products' size and production process.

3. What's your payment method?    

Paypal, T/T, L/C, Western Unions, are available.

 

Contact Information:
Jack Ren

YANTAI HAIGE MACHINE TOOLS CO.,LTD.
YANTAI HAIGE INTERNATIONAL TRADING CO.,LTD.
No.1 Jingqi Road High-tech Zone, Yantai, Shandong, China
Tel : +86-0535-6726618                        Fax: +86-0535-6896668
Mobile : +86-18663896299                  Wechat: +86-18663896299
Skype: haige@haigechina.com            Whatsapp: +86-18663896299
http://haigelathe.en.alibaba.com         http://en.haigechina.com/

 

 

 

 

 

 

Hot Tags: qsmi-ii shot blasting machine for wire 4-38mm, China qsmi-ii shot blasting machine for wire 4-38mm manufacturers, Black Rod Peeling Machine, pickling machine, Metal Bar Peeling Machine, Titanium Tube Straightening Machine, Wire Drawing Machine, Bar bar Finishing Line