CNC titanium wire peeling machine
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as titanium wire peeling machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
Titanium wire peeling machine is one of our main products, which is mainly used to wipe off remove the rust on the surface of the black titanium wire to make the black titanium wire bright. Host machine consists of the bed, main bearings, air/oil lubrication system,front-clamping pinch feeding and rear-clamping extracting, front guide and middle-rear guide system, main driving system etc. The cutting liquid circulation cooling system is mainly composed of circulating pump, pipe, nozzle etc. The chain plate chip removing machine is the matching product made by cooperative companies. Peeling chip falls down to the plate of chip removing device and is collected through belt delivering.
model | WXC30C | |
material requirement | diameter range (mm) | 6.5＜dia＜31 |
material length (mm) | ≥1400 | |
yield strength(Mpa) | ≤1100 | |
surface hardness | ≤HB320 | |
straightness (mm/m) | ≤1.5 | |
diameter tolerance | according to GB 702-2004 second group | |
roundness(mm) | ≤50% of diameter tolerance | |
surface roughness(Ra) | ≤25～50μm | |
finished product | diameter range(mm) | 6≤dia≤30 |
diameter cutting depth(mm) | 0.5~1.0 | |
diameter tolerance | ≤h10 | |
surface roughness (Ra) | ≤6.3μm | |
feeding speed (m/min) | 1.0~8.0 | |
cutting head rotation rate per minute(rpm) | 900~2000 | |
main motor(kw） | 30 | |
total capacity（kw） | 50 | |
compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine | |
Certificates
Customer
Exhibition
Packaging
Hot Tags: cnc titanium wire peeling machine, China cnc titanium wire peeling machine manufacturers, fault diagnosis of wire peeling, Surface Induction Heating, rod drilling defect repair, rod machining safety, rod drill bit, CNC Ss Rod Peeling Machine