The WXC series of center-less lathe and JY series of straightening machines are high -level new equipment with independent intellectual property rights on the basis of absorbing and digesting foreign advanced technology, making adventurous innovation, and research&development take into consideration of actual situation of domestic companies. Our technology reaches the domestic advanced level in reliability and quality while keeps a relatively lower price, with its efficiency more several times than the conventional process.
Our products are suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials.
WXC series of centerless lathe is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
|
Model |
WXC80 Y |
|
|
Material |
Diameter Range(mm) |
Φ18.5~Φ80X |
|
Tensile Strength σb(Mpa) |
≤1100 |
|
|
Length range(mm) |
3500mm-9000mm: use carriage car extraction 2500-9000: use press wheel extraction |
|
|
Surface Hardness |
≤HB320 |
|
|
Original Curvature Curvature(mm/m) |
≤1.5① |
|
|
Diameter Tolerance |
According to GB 702-2017, 2 group |
|
|
Roundness |
≤50% of the diameter tolerance(GB/T 702-2017, Group 5 |
|
|
Surface Roughness(Ra) |
≤25～50mm |
|
|
After Peeling |
Diameter Range(mm) |
Φ18~Φ79 |
|
Diameter Cutting Depth(mm) |
0.25~1.50 |
|
|
Diameter Tolerance |
≤h9-h10(Standard tolerance grade,Avoid 50mm at both ends) |
|
|
Surface Hardness(Ra) |
≤3.2-6.3μm |
|
|
Roundness |
≤0.05 |
|
Note 1: The smaller the curvature of raw materials, the better, so as to better ensure the accuracy of finished products, equipment efficiency and life. If the straightness of raw material is large, it must be straightened before turning. Otherwise, it will seriously affect the precision of finished products, the efficiency and life of equipment. If the material head has serious flying edge, flat head and bending, the flat head and bending part and chamfering of flying edge must be removed before turning.
Hot Tags: cnc type with high surface roughness wxc80y semiautomatic type centerless lathe, China cnc type with high surface roughness wxc80y semiautomatic type centerless lathe manufacturers, Metal Bar Peeler, Bearing Steel Bar Peeling Machine, Carbon Steel Bar Peeling Machine, Auto Parts Peeler, Copper Bar Peeling, Bright Bar Peeler
