Quality: Our company regards quality as life. We have already passed ISO9001 certification, and strictly implement the ISO9001 international quality management system. We keep improving quality in order to let customers buy with comfort and use with satisfaction.
Our company can also make specified equipment according to customers’ requirement.
Our service:
1. Free quality guarantee period for 12 months, except for wearing parts.
2. Free provide long-term technical support
3. Free train buyer’s operator in seller’s factory
4. Fast response service within 24 hours
5.Our engineers can offer overseas service, including guiding installation, commissioning, training, etc, if our customer needs.
Packaging and shipping
we have much experience in exporting transportation packaging.
Taking multi protection measures:
The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.
Second layer
inside of plywood box, adopting small square plywood block and strapping belt to fix.
Third layer
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
Fourth layer
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.
Product Description
Description:
Machine technical introduction
The XF-WXC400S center-less lathe is high-level new equipment with independent intellectual property rights on the basis of absorbing and digesting foreign advanced technology, making adventurous innovation, and taking into consideration of actual situation of domestic companies in the process of research&development.
This machine adopts PLC numerical control technology and touch screen operation control which results in strong practicability, stable processing, high speed, high efficiency and good surface quality. Online cutting tool adjusting can be realized during process. Closed loop online automatic diameter control can be realized after adding detection points. High degree of automation is available. This machine is possessed with auto and manual two control system and can be used alternatively.
Specification
Unit Technical Specifications and Equipment composition
1.Raw material:
1.1 Materials: Titanium alloy, stainless steel, bearing steel, spring steel, alloy tool steel, carbon tool steel, high-speed tool steel, carbon steel, alloy steel, non quenched and tempered steel, free cutting steel, valve steel, gear steel , die steel and non-ferrous metal, pipes.
1.2: Loading Weight: ≤15000Kg
Specification of Raw material:
1.3: Diameter range: Φ207-Φ410mm
1.4: Diameter deviation: GB702-86 group2 standard
Straightness: 2‰
Length range:5M-6M
2.Finished products:
2.1 Diameter range: Φ200-Φ405mm
2.2 Dimension precision ≤h9
2.3 Roughness Ra ≤3.2μm
3.Main technical parameter
3.1: Cutting depth: 0.5-5.0mm
3.2: Cutter head speed(frequency conversion):20-160r/min (two gears)
3.3 Feeding speed (CVT): 0.3-1.5m/min (For big and small diameter, continuous chip, deep cutting, high strength, high hardness, the speed must be lowered.)
3.4: Main motor power: 250kw
3.5: Feeding motor power: 11kw
3.6.Extracting motor power: 4kw
3.7Motor power of hydraulic station: 15KW
3.8Cooling pump motor power: 2.2KW
4.Energy Resource medium parameter
4.1: Voltage: 3X380V±15V
4.2: Frequency: 50HZ±2HZ
4.3: Installed capacity (reference): 350KW
4.4: Pneumatic flow: 0.5m³/min
4.5: Coolant flow: 170L/min
5.Equipment composition
5.1: Loading rack: one set
5.2: Loading trolley: one set
5.3 Loading table roller:one set
5.4: Main machine: one set
⑴ Feeding device:one set
⑵ Front guide device:one set
⑶ Main spindle device: one set
⑷ Middle-rear guide device:one set
⑸ Clamping carriage device:one set
(6) Extracting device:one set
5.5: Unloading roller table:one set
5.6 Unloading trolley: one set
5.7 Unloading rack:one set
6.Process Description
6.1: Processing as Loading rack→Loading trolley→ loading roller table → feeding device → front guide device→main spindle device →middle-rear guide device →clamping carriage device→draw-out(extracting) device→unloading roller table → unloading trolley→ unloading rack
Product Display
Packing & Delivery
we have much experience in exporting transportation packaging.
Taking multi protection measures:
The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.
Second layer
inside of plywood box, adopting small square plywood block and strapping belt to fix.
Third layer
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
Fourth layer
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.
Hot Tags: bar use new condition special steel titanium ti peeling machine, China bar use new condition special steel titanium ti peeling machine manufacturers, Copper Bar Peeling, Carbon Steel Bar Peeling Machine, Bright Bar Peeler, Bearing Steel Bar Peeling Machine, Auto Parts Peeler, Metal Bar Peeler
