WXC8S PLUSCNC TYPE Centerless Lathe

WXC8S PLUSCNC TYPE Centerless Lathe price

WXC8S PLUSCNC TYPE Centerless Lathe

The WXC series of center-less lathe and JY series of straightening machines are high -level new equipment with independent intellectual property rights on the basis of absorbing and digesting foreign advanced technology, making adventurous innovation, and research&development take into consideration of actual situation of domestic companies. Our technology reaches the domestic advanced level in reliability and quality while keeps a relatively lower price, with its efficiency more several times than the conventional process. Our products are suitable to process different kinds of metal material, for instance, black metal material such as structural steel, alloy steel, spring steel, bearing steel,tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy, titanium and titanium alloy and other non-ferrous metal materials. WXC series of centerless lathe is high-efficient specialized lathe to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able to not only get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.

Send Inquiry

product-974-382

Model number		XF-WXC80S+
Raw material	(mm) :diameter range(mm)	Φ20~Φ80
	(mm) :length range(mm)	3400mm-8000mm:
	tensile strengthσb(Mpa)	≤1100
	surface hardness	≤HB320
	curvature(mm/m):	≤1.50 ①
	diameter tolerance:	According to GB 702-2017, 2 group
	roundness	≤50% of the diameter tolerance(GB/T 702-2017 ,5group)
	surface roughness:Ra	≤25～50mm
Finished product	diameter range(mm):	Φ19~Φ79
	literal cutting depth(mm)	0.25~1.5
	diameter tolerance:	h9(avoid both ends 50mm)
	surface roughness:Ra	≤3.2μm
	roundness:(mm)	≤0.04
feeding speed(infinitely variable speeds m/min)		3~12(Continuous chip, high strength, high hardness, large cutting capacity, large straightness, large diameter material to reduce speed)
Cutter head speed(Four-speed transmission + variable frequency transmission)(r/min)		400-1600
Main Motor(kw)		90
feeding speed motor Power(kw)		11
water pump motor(kw):		2.2
Total Power(kw) take reference:		Around 130
Total weight(t)( take reference:		20
voltage/frequency:		380V/50HZ
Compressed air source (user provided)		0.5~0.8MPa,0.5m3/min with 2 grade oil&water separator

The Equipment Composition:

No.	Name		Quantity
1	loading rack/online Mechanism		1set
2	loading roller table+clamping Mechanism		1set
3	Main Machine	clamping device	1set
		front guide device	1set
		main spindle device	1set
		middle and rear guide device	1set
		carriage car( trolley)	1set
		Extract device	1set
		hydraulic system(hydraulic station)	1set
		chip removal system(chip conveyor)	1set
		hydraulic station cooling system	1set
		The air/oil lubrication system	1set
		Cutting fluid circulation cooling system	1set
4	unloading roller table		1set
5	unloading rack/ (collecting groove or online mechanism		1set
6	Electrical system		1set
7	chip conveyor		1set
8	hydraulic station		1set
9	water pump		1set