Cnc Type HGLG-50-GLS Cold Pilger Mill best

Cnc Type HGLG-50-GLS Cold Pilger Mill suppliers

Cnc Type HGLG-50-GLS Cold Pilger Mill factory

Cnc Type HGLG-50-GLS Cold Pilger Mill high quality

Cnc Type HGLG-50-GLS Cold Pilger Mill

Send Inquiry

Product descripation:

HGLG-18-GLS type Cold Pilger Mill is a special equipment for producing high precision seam less metal tube by using chip-free processing technology, can be used to produce high standard cold rolled steel tube so fvarious material satroom temperature. The size range off inished tube is F6～F18mm in diameter, 0.35～4.5 mm inwall thickness, and the surface roughness Ra≤0.4～0.8μm. The tolerances on dimensions and shape of finished tube can meet the China national standard of precision cold-rolledtube.

Main Parameters:

Item	Unit	HGLG-50-GLS Parameters
OD of mother tube	mm	φ25～φ63.5
Thickness of mother tube	mm	1～8
Length of mother tube	m	2～6
Diameter tolerance of mother tube	%	±1.0
Thicknesstoleranceofmothertube	%	±7.5
Straightness tolerance of mother tube	mm/m	≤1.0;howevertheblankmustinany casepassfreelyoverthemandrelrod
OD of finished tube	mm	φ16～φ50
Thickness of finished tube	mm	0.6～5
Max.length of pipe rolled	m	～20
pipe length after cutting	m	2～6
Diameter tolerance of tube	%	±0.5
Thickness tolerance oftube	%	±5
Ra Surface roughness of tube	μm	0.4～0.8
Tube material		Ti alloys and Zi alloys
Max rolling force	KN	1000
Coefficient of elongation		≤3.5
Rolling speed	Strokes/min	100～150 (Design at 200)
Feed range	mm/stroke	0.5～8 Infinite variable (dependonmaterialandstart-uprollingroute)
Turning angle of tube	degree	＜90 On one complete stroke
Structure form offeeding and turning device		AC servo motor -Worm geardrive
Mode of feeding andturning		Double-feed, double-turn
Operation mode		End loading needn't stop
Structure of roll housing		closed roll housing
Drive mode of roll housing		Doublecrank-connectingroddrive withdoublesectorblockbalancesystem

Crank radius	mm	400
Connecting Rod Length	mm	3000
Deviation between crank central line& connecting rod central line onhousing	mm	290
Stroke length	mm	～800
Modulus of synchronizing gear	mm	10
Roll nominal size	mm	Φ300
Main motor power	KW	220(AC)
Feeding servo motor	KW	～2*23(110 Nm)
Turning servo motor	KW	～5*23(110 Nm)
Installed capacity	KW	～450
Equipment lubrication flow	L/min	40
Technological lubrication station flow	L/min	360
Hydraulic station flow	L/min	63
Cooling water consumption	m3/h	～40(0.3～0.5MPa) ≤35 ℃)
Compressed air consumption	m3/h	15(0.5～0.7MPa)
The total weight of mill	t	～75
Mill orientation		At User's option
rolling line height	mm	850
Rolling mill area	m	～60×6