Home / Products / Plating Machine

High Effiency Continuous 6-channel 2-series Plating Machine

High Effiency Continuous 6-channel 2-series Plating Machine suppliers

High Effiency Continuous 6-channel 2-series Plating Machine factory

High Effiency Continuous 6-channel 2-series Plating Machine best

High Effiency Continuous 6-channel 2-series Plating Machine high quality

High Effiency Continuous 6-channel 2-series Plating Machine price

High Effiency Continuous 6-channel 2-series Plating Machine

The equipment is through-type, used for one-layer chromium plating on the outer surface of round rod material (slender shaft). The equipment is composed of automatic feeding system, driving system, conductive system, activation system, electroplating system, automatic unloading system, pressure system, temperature control system and electronic control system.

Send Inquiry

Main technical parameters

1.Name：mandrel/slender shaft

2.Material：45#,40Cretc,Mainly 45#

3.diameter range：φ10mm-φ40mm

4.length range：4000-6000mm

5.surface quality of input bar requirement：roughness：Ra0.1--0.2;straightness：0.1/1000

6.plating rate：3200--4200m/h(take example of plate thickness :0.025mm,one channel)

7.the surface quality of finished workpiece

1)thickness of plating layer： 0.02-0.04mm(unilateral)

2)Appearance：Chromium plating layer must be continuous, meticulous crystallization, smooth surface, no leakage plating area. The surface of the coating is not allowed to have pinhole, chromium lump, rough, burr, excoriation and other defects.

3)Chromium layer hardness：HV≥800,the adhesion of chromium plating layer must be strong, the chromium layer should not be warped,peeled and shedding when doing the experiment with a knife.

Work process

work2