Product Description
Title goes here.
Equipment Introduction:
The WXC series of peeling machines(center-less lathes) are high-level new equipment innovated by us with some patents based on many advanced foreign and domestic patterns of similar machines so that Our technology of the machines reaches the highest level in reliability and quality in China, while the comparatively lower prices and efficiency several times more than the conventional ones are kept.
The machines are suitable to process different kinds of metal materials including black metal materials such as structural steel,alloy steel, spring steel, bearing steel, tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy,titanium and titanium alloy and other non-ferrous metal materials.
WXC series is specialized lathes of high efficiency to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able not only to get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
The machines are suitable to process different kinds of metal materials including black metal materials such as structural steel,alloy steel, spring steel, bearing steel, tool steel, copper and copper alloy, aluminum and aluminum alloy, magnesium alloy,titanium and titanium alloy and other non-ferrous metal materials.
WXC series is specialized lathes of high efficiency to make a rough or fine machining to the surface of bar material such as slender shaft and other bars. It is able not only to get rid of the imperfection on the bar surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy. It is especially suitable to process extra long bar and bar with large machining allowance.
Specification
1. Main Parameters
Model
WXC80CA
Input Bars
Processing Range（mm）
Φ19~Φ85X 2500~6000
Tensile Strength σb（Mpa）
≤1100
Surface Hardness
≤HB320
Curvature（mm/m）
≤1.50 ①
Diameter Tolerance
According to GB 702-88 second group
Roundness
≤50% of Diameter Tolerance
Roughness(Ra)
≤25～50mm
Output Bars
Diameter Range（mm）
Φ18~Φ83
Unilateral Cutting Depth（mm）
0.35~1.5
Diameter Tolerance
≤h9-h10（standard grade）
Surface Roughness（Ra）
3.2μm
Curvature
Same as input material
Roundness（mm）
≤0.04
processing Speed（Continuously variable transmission(CVT) m/min）
1.0~10.0（for continuous chip, deep cutting or high strength, high hardness, much bigger or smaller
bars, the feeding speed must be reduced to suitably lower.）
Cutting Head Rotating Speed（r/min）
430~1200
Main Motor Power（KW）
75（4 pole）
Feeding Motor Power（KW）
5.5Feeding motor)+0.75(Extracting motor)
Outline Dimension Approximate（m）
3.5X3.5X2.4
Weight Approximate（MT）
Main Machine 8.5
Total Capacity Approximate（KW）
95
）Compressed Air Source（prepared by buyer）
0.5~0.8MPa、1.8m3/m
To gurantee the long life and high efficiency of the machine and the precision of the products, the unqualified straightness and
two ends of the input bars have t o be processed before peeling.
三、
1. Equipment Composition and Description
1、 Equipment Composition
Main Machine 1set
utting Fluid Circulation Cooling System 1set
Chain and Plate Chip Conveyor 1set
Hydraulic System 1set
Electrical System 1set
Loading Rack, Loading Roller table for 7m material 1set
箱unloading Rack, Unloading Roller table for 7m material 1set
2、设备功能描述 Equipment Description
Product Display
Hot Tags: wxc80y high capacity semi-automatic type peeling machine, China wxc80y high capacity semi-automatic type peeling machine manufacturers, Copper Bar Peeling, Carbon Steel Bar Peeling Machine, Bearing Steel Bar Peeling Machine, Metal Bar Peeler, Bright Bar Peeler, Auto Parts Peeler
